You currently are browsing our new online store! You can still access the old store at shop.duxtel.com.au. Please if you find any bugs!

wAP BE

Neat Ceiling/Wall Mount AP device for indoor or outdoor use!

The wAP (wall AP) is a small weatherproof wireless access point for your mobile
devices, perfect for installation outside your house, in the garden, on your porch or
anywhere else where you need wireless access from your phone or computer.
 
The device has one 10/100 Ethernet port and can be
mounted on a wall to provide basic internet access in any
location. It looks unobtrusive and sleek, available in two
colours - black (RBwAP2nD-BE) and white (RBwAP2nD).
It is waterproof and can be attached to any external wall from
the inside of the case - so that it is not easy to detach from
it’s mounting location. The bottom door can also be secured
with a special screw, which can only be opened by the
owner.
 
It is also possible to run the Ethernet cable directly behind
the unit, to inside the wall, there is a special opening on the
back of the case. This way, the unit doesn’t attract attention
and blends into any environment.

Product specifications:

Details
Product code  RBwAP2nD-BE (black)
CPU  650 MHz QCA9531-AL3
CPU Core Count  1
Size of RAM  64 MB
10/100 Ethernet ports  1
10/100/1000 Ethernet ports  0
Antenna Gain  2dBi
Antenna Beam Width  360°
Number of USB ports  0
Power Jack  yes
Supported Input Voltage  11 V - 57 V (Passive PoE and 802.3af/at with unshielded cable)
PoE IN  yes
Dimensions  113 x 89 x 28mm
Operating System  RouterOS L4
Max Power Consumption  4W

 

 

Wireless Specifications:
RATE RX Sensitivity TX (dBm)
1Mbit -96 22
11Mbit -89 22
6Mbit -93 20
54Mbit -74 18
MCS0 -93 20
MCS0 -71 16

 

  pdf brochure

General
Name wAP BE
Can be used indoors Yes
Certification FCC, IC
Dimensions 185 x 85 x 30 mm
MTBF Approximately 100'000 hours at 25C
Tested ambient temperature -40C to +70C
Can be used outdoors Yes
Interfaces
10/100 Ethernet ports 1
OS
Operating System RouterOS
RouterOS license 4
CPU
Architecture MIPSBE
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
Board
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Powering
DC jack input Voltage 11-57 V
Max power consumption 4 W
Number of DC inputs 2
PoE
PoE in 802.3af/at
PoE in input Voltage 11-57 V
Wireless
802.11b Yes
802.11g Yes
802.11n Yes
Antenna gain 2
TX power
2.4 GHz
TX RX
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71
Wi-Fi generation Wi-Fi 4
Wireless 1 Max data rate 300 Mbit/s
Wireless 1 Number of chains 2
Wireless 1 band 2.4 GHz
Wireless 1 generation Wi-Fi 4
Wireless chip model QCA9531
Wireless standards 802.11b/g/n

Write a review

Please login or register to review

wAP BE

  • Brand: Mikrotik
  • Product Code: RBwAP2nD-BE