Check our office hours and order fulfilment detail over the Summer Break!
Short story: Skeleton Crew will be on deck to prepare and ship orders throughout! 🤓🩻

SXT LTE6 kit

Integrated outdoor LTE client device for cellular network connectivity

This is the ORIGINAL model of SXT-LTE6 (2023) - Looking for the new (2023) version? 

NOTE: This product ships with RouterOSv7 installed and can NOT be downgraded to run routerOSv6.

SXT LTE6 kit is a device for remote locations that are within cellular network coverage. Due to its advanced LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones fail.

The new SXT LTE6 features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. It also has two Micro SIM slots for backup link. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.

Brochure

You might also consider the NanoBracket: swivel mounting kit for RB/SXT

Specifications
Product code RBSXTR&R11e-LTE6
Architecture MIPSBE
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
Switch chip model QCA9531
RouterOS license 3
Operating System RouterOS
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
MTBF Approximately 200'000 hours at 25C
Tested ambient temperature -30°C to 60°C
Powering
Number of DC inputs 1 (PoE-IN)
Max power consumption 21 W
Max power consumption without attachments 7 W
Cooling type Passive
PoE in 802.3af/at
PoE in input Voltage 12-57 V
Ethernet
10/100 Ethernet ports 2
Peripherals
Number of SIM slots 2 Modem (Micro SIM)
MiniPCI-e slots 1
Certification & Approvals
Certification CE, EAC, ROHS
IP IP54
Mobile
2G Category Class12
2G bands 2 (1900MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz)
3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) / R8 (42.2Mbps Downlink, 5.76Mbps Uplink)
3G bands 1 (2100MHz) / 2 (1900MHz) / 5 (850MHz) / 8 (900MHz)
LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink)
LTE FDD bands 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 5 (850MHz) / 12 (700MHz) / 17 (700MHz) / 25 (1900MHz) / 26 (850MHz)
LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 39 (1900MHz) / 41n (2500MHz)
TAC 35666210
PoE-out
PoE-out ports Ether2
PoE out Passive PoE up to 57V
Max out per port output (input 18-30 V) 600 mA
Max out per port output (input 30-57 V) 400 mA
Max total out (A) 600 mA
Other
Mode button Yes

Write a review

Please login or register to review

SXT LTE6 kit

  • Brand: Mikrotik
  • Product Code: RBSXTR&R11e-LTE6

Related Products

QMP

QMP

Adds three degrees of freedom alignment for SXT, BaseBox and OmniTIK products: The quickMOUNT ..

$16.00 Ex Tax: $14.55

QM

QM

Room to mount up to two SXT devices: The quickMOUNT is a basic wall mount adapter for small po..

$10.00 Ex Tax: $9.09

QME

QME

Room to mount up to two SXT devices: The quickMOUNT extra is a advanced wall mount adapter for..

$17.50 Ex Tax: $15.91

LtAP LTE6 kit

LtAP LTE6 kit

NOTICE - END OF LIFE PRODUCT!!! Product remains available only while current and expected arriving s..

$335.00 Ex Tax: $304.55

LHGG LTE6 kit

LHGG LTE6 kit

Do you want high-speed Internet in the middle of nowhere? Then you want our newest LHGG LTE6 kit! It..

$299.00 Ex Tax: $271.82

Chateau LTE6 ax

Chateau LTE6 ax

Are you tired of those suspicious, low-quality default routers from your service providers? So many ..

$351.00 Ex Tax: $319.09

Tags: R11e-LTE, lte6, sxt, lte, RB, mikrotik, SXTR, kit, RBSXTR, modem, RBSXTR&R11e-LTE6