SXT SA5 ac
RBSXTG-5HPacD-SA: Now with 802.11ac support for up to 540 Mbit actual throughput
Upgrade to 802.3af PoE for just a few dollars more!
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAMĀ modulation, and 80MHz channels. 802.11ac opens up new possibilities and speedsĀ never possible before.
New products are backwards compatible- for example, you can replace your 5GHz 802.11an legacy Access Point with new 802.11ac product and your existing customers will still be able to connect to it.
Features:
- 1300mW RF output
- extended temperature range -30C to +80C
- up to 540Mbps real throughput
- low latency Point to Point
- Solid all-in-one design: quick and easy to mount
- Tower friendly one hand enclosure access
- 5GHz 802.11a/n/ac wireless onboard
- One 10/100/1000 Ethernet port
- 16dBi dual chain antenna built-in
- Signal strength LED indicators on back
- USB 2.0 port, voltage and temperature monitors
- Extended L2MTU support to avoid fragmentation overhead in MPLS, QinQ etc.
SXTGac Options:
For additional flexibility, we are able to offer different power supply options:
- Standard (default): Ships with an Australian format 19Watt 24V MEPSIV compliant switch mode plug pack PSU and PoEL passive PoE injector
- 802.3af Upgrade: For just a few dollars extra, substitute standard PSU and PoE Injector a MikroTik PoE Converter
Make your option selections below!
You might also consider the NanoBracket: swivel mounting kit for RB/SXT
| Specifications | |
| Product code | RBSXTG-5HPacD-SA |
| Architecture | MIPSBE |
| CPU | QCA9557 |
| CPU core count | 1 |
| CPU nominal frequency | 720 MHz |
| RouterOS license | 4 |
| Operating System | RouterOS |
| Size of RAM | 128 MB |
| Storage size | 128 MB |
| Storage type | NAND |
| MTBF | Approximately 200'000 hours at 25C |
| Tested ambient temperature | -40Ā°C to 70Ā°C |
| Powering | |
| Number of DC inputs | 1 (PoE-IN) |
| Max power consumption | 12 W |
| Cooling type | Passive |
| PoE in | 802.3af/at |
| PoE in input Voltage | 12-57 V |
| Ethernet | |
| 10/100/1000 Ethernet ports | 1 |
| Peripherals | |
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
| Certification & Approvals | |
| Certification | CE, FCC, IC, EAC, ROHS |
| IP | IP54 |
| Other | |
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
| Beeper | Yes |
| Wireless specifications | |
| 5 GHz TX/RX | <table class="table product-table"> <thead> <tr> <th> 5 GHz </th> <th> Transmit (dBm) </th> <th> Receive Sensitivity </th> </tr> </thead> <tr> <td> 6MBit/s </td> <td> 31 </td> <td> -96 </td> </tr> <tr> <td> 54MBit/s </td> <td> 28 </td> <td> -81 </td> </tr> <tr> <td> MCS0 </td> <td> 30 </td> <td> -96 </td> </tr> <tr> <td> MCS7 </td> <td> 27 </td> <td> -77 </td> </tr> <tr> <td> MCS9 </td> <td> 22 </td> <td> -72 </td> </tr> </table> |
| Wireless 5 GHz Max data rate | 867 Mbit/s |
| Wireless 5 GHz number of chains | 2 |
| Wireless 5 GHz standards | 802.11a/n/ac |
| Antenna gain dBi for 5 GHz | 14 |
| Wireless 5 GHz chip model | QCA9892 |
| Wireless 5 GHz generation | Wi-Fi 5 |
SXT SA5 ac
- Brand: Mikrotik
- Product Code: RBSXTG-5HPacD-SA
| Qty | 1 | 5 | 10 | 20 |
|---|---|---|---|---|
| Inc. | $208.00 | $187.20 | $180.96 | $174.72 |
| Ex. | $189.09 | $170.18 | $164.51 | $158.84 |
| Availability: | No/Low Stock! |
| Further units due: | 2025-01-14 |
What does this info mean?
Related Products
QMP
Adds three degrees of freedom alignment for SXT, BaseBox and OmniTIK products: The quickMOUNT ..
$16.00 Ex Tax: $14.55
QM
Room to mount up to two SXT devices: The quickMOUNT is a basic wall mount adapter for small po..
$10.00 Ex Tax: $9.09
QME
Room to mount up to two SXT devices: The quickMOUNT extra is a advanced wall mount adapter for..
$17.50 Ex Tax: $15.91
QM-X
Tilt Axis adjustment adapter for SXTsq models: Recently weāve seen a demand for additional pol..
$5.00 Ex Tax: $4.55
Tags: 5ghz, 802.11ac, sa5, SXTG, dual chain, 2 chains, dual, wireless, high gain, sxt, ap, mikrotik, wifi, RB, RBSXTG, high power, ac, RBSXTG-5HPacD-SA