GPeR: [GPEN] Gigabit Passive Ethernet Repeater

Double the servicable maximum length of ethernet cables!

The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.

Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.

Maximium allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m).

Maximium allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).

In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.

General
Name GPeR
Can be used indoors Yes
Certification CE, EAC, ROHS
FAN count Passive
MTBF Approximately 100'000 hours at 25C
Tested ambient temperature -40°C to 70°C
Interfaces
10/100/1000 Ethernet ports 2
Board
Storage size 64 KB
Storage type FLASH
Powering
Max power consumption 2 W
Number of DC inputs 1
Max power consumption without attachments 2 W
PoE
PoE in 802.3af/at
PoE in input Voltage 24-57 V
Max out per port output (input < 30 V) 2 A
Max total out (A) 2 A
PoE out 802.3af/at
PoE-out ports Ether2
Max out per port output (input > 30 V) 0.7 A

Write a review

Please login or register to review

GPeR: [GPEN] Gigabit Passive Ethernet Repeater