hAP ax²

The hAP ac² is back, but as a Dual Bank WiFi6 AP!
NOTE: This product ships with RouterOSv7 installed and can NOT be downgraded to run routerOSv6.

Warning: There is a current limitation with 802.11x devices that station-bridge and other client bridge modes IS NOT POSSIBLE - for such purposes, an alternative mechanism such as L2tP v3 or EoIP must be used as an alternative to implement the WiFi6 client bridge.

It’s time to supercharge your home network with the Generation 6 wireless network and our latest addition to the beloved hAP series. hAP ax² has everything you might need in a primary home access point – and more! Forget endless reviews and comparisons – this is the perfect device for 99% of homes.

Wireless signal is now stronger than ever. Here are the two main ingredients of hAP ax’s success: a state-of-the-art dual-band, dual-chain 4-4.5 dBi radio, and the 802.11ax standard with Wave2 support. Let’s compare it to the previous generation: depending on your overall setup, that means up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum!

Some might ask – why do we even need higher wireless speeds? Well, countless use cases have been previously impossible or difficult to pull off. For example, working with large media files over the wireless network – without the need to download and upload everything. Do you really have the time to wait? Grab a hAP ax² and save more time for the essential things in life!

The modern quad-core CPU running at 864 MHz combined with a solid GB of RAM packs a hefty punch when it comes to heavy operations like complex firewall rules, IPsec hardware encryption, using more threads or experimenting with the most advanced RouterOS features. And with the addition of WPA3 advanced encryption support, you’re safer than ever before.

Like the previous models, hAP ax² can be mounted vertically, horizontally, or even on the wall – without sacrificing the strong signal.

With so many products and features on the market, even an experienced user can become confused. So it’s time for a simple truth for a simple choice : you can’t go wrong with a hAP ax² in most homes.

Specifications
Product code C52iG-5HaxD2HaxD-TC
Architecture ARM 64bit
CPU IPQ-6010
CPU core count 4
CPU nominal frequency 864 MHz
Switch chip model IPQ-6010
RouterOS license 4
Operating System RouterOS v7
Size of RAM 1 GB
Storage size 128 MB
Storage type NAND
MTBF Approximately 100'000 hours at 25C
IPsec hardware acceleration Yes
Tested ambient temperature -40°C to 50°C
Powering
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 12-28 V
Max power consumption 27 W
Max power consumption without attachments 12 W
Cooling type Passive
PoE in Passive PoE
PoE in input Voltage 18-28 V
Ethernet
10/100/1000 Ethernet ports 5
Number of 1G Ethernet ports with PoE-out 1
Certification & Approvals
Certification CE, FCC, IC, EAC, ROHS
IP 20
PoE-out
PoE-out ports Ether 1
PoE out Passive PoE
Max out per port output (input 18-30 V) 600 mA
Max total out (A) 0.6 A
Total output current 0.6
Total output power 16.8W
Other
CPU temperature monitor Yes
Mode button Yes
Wireless specifications
2.4 GHz TX/RX <table class="table product-table"> <thead> <tr> <th> 2.4 GHz </th> <th> Transmit (dBm) </th> <th> Receive Sensitivity </th> </tr> </thead> <tr> <td> 1MBit/s </td> <td> 27 </td> <td> -100 </td> </tr> <tr> <td> 11MBit/s </td> <td> 27 </td> <td> -94 </td> </tr> <tr> <td> 6MBit/s </td> <td> 27 </td> <td> -96 </td> </tr> <tr> <td> 54MBit/s </td> <td> 25 </td> <td> -80 </td> </tr> <tr> <td> MCS0 </td> <td> 27 </td> <td> -96 </td> </tr> <tr> <td> MCS7 </td> <td> 24 </td> <td> -75 </td> </tr> <tr> <td> MCS9 </td> <td> 22 </td> <td> -70 </td> </tr> <tr> <td> MCS11 </td> <td> 20 </td> <td> -67 </td> </tr> </table>
5 GHz TX/RX <table class="table product-table"> <thead> <tr> <th> 5 GHz </th> <th> Transmit (dBm) </th> <th> Receive Sensitivity </th> </tr> </thead> <tr> <td> 6MBit/s </td> <td> 26 </td> <td> -96 </td> </tr> <tr> <td> 54MBit/s </td> <td> 23 </td> <td> -80 </td> </tr> <tr> <td> MCS0 </td> <td> 26 </td> <td> -96 </td> </tr> <tr> <td> MCS7 </td> <td> 22 </td> <td> -75 </td> </tr> <tr> <td> MCS9 </td> <td> 20 </td> <td> -70 </td> </tr> <tr> <td> MCS11 </td> <td> 18 </td> <td> -67 </td> </tr> </table>
Wireless 2.4 GHz Max data rate 574 Mbit/s
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n/ax
Antenna gain dBi for 2.4 GHz 4
Wireless 2.4 GHz chip model QCN-5022
Wireless 2.4 GHz generation Wi-Fi 6
WiFi speed AX1800
Wireless 5 GHz Max data rate 1200 Mbit/s
Wireless 5 GHz number of chains 2
Wireless 5 GHz standards 802.11a/n/ac/ax
Antenna gain dBi for 5 GHz 4.5
Wireless 5 GHz chip model QCN-5052
Wireless 5 GHz generation Wi-Fi 6

Write a review

Please login or register to review

hAP ax²

  • Brand: Mikrotik
  • Product Code: C52iG-5HaxD2HaxD-TC

Related Products

hAP ac²

hAP ac²

The hAP ac² is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHzfreq..

$137.00 Ex Tax: $124.55

hAP ax³

hAP ax³

AX home access point with all the processing power and speed your household will ever need! NOTE: Th..

$240.00 Ex Tax: $218.18

hAP ax lite

hAP ax lite

Gen6 wireless on a budget – tiny, fast, and strong enough to harvest the power of RouterOS v7 NOTE: ..

$96.00 Ex Tax: $87.27

cAP ax

cAP ax

The dual band WiFi6 AP we've all been waiting for! NOTE: This product ships with RouterOSv7 instal..

$225.00 Ex Tax: $204.55

L009UiGS-2HaxD-IN

L009UiGS-2HaxD-IN

NOTE: This product ships with RouterOSv7 installed and can NOT be downgraded to run routerOSv6.Warni..

$222.00 Ex Tax: $201.82

Tags: 5ghz, dual chain, ax, hap, 2 chains, dual, 2ghz, wi-fi 6, wireless, high gain, ax2, ap, C52, wifi, mikrotik, 802.11ax, wi-fi6, gigabit, wifi6, wifi 6, C52iG-5HaxD2HaxD-TC